--- Revision None +++ Revision 383334303132 @@ -0,0 +1,797 @@ +Initializing cgroup subsys cpuset +Initializing cgroup subsys cpu +Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Feb 11 09:29:49 CET 2011 +Command line: root=/dev/disk/by-uuid/4295888a-15ee-4216-b358-e6b019fe9ae5 ro +BIOS-provided physical RAM map: + BIOS-e820: 0000000000000000 - 000000000009e000 (usable) + BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) + BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) + BIOS-e820: 0000000000100000 - 00000000b9e60000 (usable) + BIOS-e820: 00000000b9e60000 - 00000000b9ebf000 (reserved) + BIOS-e820: 00000000b9ebf000 - 00000000b9f80000 (usable) + BIOS-e820: 00000000b9f80000 - 00000000b9fbf000 (ACPI NVS) + BIOS-e820: 00000000b9fbf000 - 00000000b9fe2000 (usable) + BIOS-e820: 00000000b9fe2000 - 00000000b9ff7000 (ACPI data) + BIOS-e820: 00000000b9ff7000 - 00000000ba000000 (usable) + BIOS-e820: 00000000ba000000 - 00000000c0000000 (reserved) + BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) + BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) + BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) + BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) + BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) + BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) + BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) + BIOS-e820: 0000000100000000 - 0000000140000000 (usable) +NX (Execute Disable) protection: active +DMI 2.6 present. +DMI: JM11-MS/Aspire 1810TZ, BIOS v1.3314 08/31/2010 +e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) +e820 remove range: 00000000000a0000 - 0000000000100000 (usable) +No AGP bridge found +last_pfn = 0x140000 max_arch_pfn = 0x400000000 +MTRR default type: uncachable +MTRR fixed ranges enabled: + 00000-9FFFF write-back + A0000-BFFFF uncachable + C0000-FFFFF write-through +MTRR variable ranges enabled: + 0 base 000000000 mask F80000000 write-back + 1 base 0FFE00000 mask FFFE00000 write-protect + 2 base 080000000 mask FC0000000 write-back + 3 base 0BC000000 mask FFC000000 uncachable + 4 base 0BA000000 mask FFE000000 uncachable + 5 base 100000000 mask FC0000000 write-back + 6 disabled + 7 disabled +x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 +last_pfn = 0xba000 max_arch_pfn = 0x400000000 +Scanning 0 areas for low memory corruption +initial memory mapped : 0 - 20000000 +init_memory_mapping: 0000000000000000-00000000ba000000 + 0000000000 - 00ba000000 page 2M +kernel direct mapping tables up to ba000000 @ 1fffc000-20000000 +init_memory_mapping: 0000000100000000-0000000140000000 + 0100000000 - 0140000000 page 2M +kernel direct mapping tables up to 140000000 @ b9ffa000-ba000000 +RAMDISK: 37e45000 - 37ff0000 +ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) +ACPI: XSDT 00000000b9ff6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013) +ACPI: FACP 00000000b9ff4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: DSDT 00000000b9fe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: FACS 00000000b9f8d000 00040 +ACPI: DMAR 00000000b9ff5000 000B0 (v01 ? 00000001 00000000) +ACPI: HPET 00000000b9ff3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: APIC 00000000b9ff2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: MCFG 00000000b9ff1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: ASF! 00000000b9ff0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: SLIC 00000000b9fe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: BOOT 00000000b9fe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) +ACPI: SSDT 00000000b9fe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) +ACPI: Local APIC address 0xfee00000 + [ffffea0000000000-ffffea00045fffff] PMD -> [ffff8800ac000000-ffff8800af7fffff] on node 0 +Zone PFN ranges: + DMA 0x00000010 -> 0x00001000 + DMA32 0x00001000 -> 0x00100000 + Normal 0x00100000 -> 0x00140000 +Movable zone start PFN for each node +early_node_map[6] active PFN ranges + 0: 0x00000010 -> 0x0000009e + 0: 0x00000100 -> 0x000b9e60 + 0: 0x000b9ebf -> 0x000b9f80 + 0: 0x000b9fbf -> 0x000b9fe2 + 0: 0x000b9ff7 -> 0x000ba000 + 0: 0x00100000 -> 0x00140000 +On node 0 totalpages: 1023707 + DMA zone: 56 pages used for memmap + DMA zone: 6 pages reserved + DMA zone: 3920 pages, LIFO batch:0 + DMA32 zone: 14280 pages used for memmap + DMA32 zone: 743301 pages, LIFO batch:31 + Normal zone: 3584 pages used for memmap + Normal zone: 258560 pages, LIFO batch:31 +ACPI: PM-Timer IO Port: 0x408 +ACPI: Local APIC address 0xfee00000 +ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) +ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) +ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) +ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) +ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) +IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 +ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) +ACPI: IRQ0 used by override. +ACPI: IRQ2 used by override. +ACPI: IRQ9 used by override. +Using ACPI (MADT) for SMP configuration information +ACPI: HPET id: 0x8086a201 base: 0xfed00000 +SMP: Allowing 4 CPUs, 2 hotplug CPUs +nr_irqs_gsi: 40 +PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 +PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 +PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 +PM: Registered nosave memory: 00000000b9e60000 - 00000000b9ebf000 +PM: Registered nosave memory: 00000000b9f80000 - 00000000b9fbf000 +PM: Registered nosave memory: 00000000b9fe2000 - 00000000b9ff7000 +PM: Registered nosave memory: 00000000ba000000 - 00000000c0000000 +PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000 +PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 +PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 +PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 +PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 +PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 +PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 +PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 +PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 +PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 +PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 +PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 +PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 +PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 +Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) +Booting paravirtualized kernel on bare hardware +setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 +PERCPU: Embedded 27 pages/cpu @ffff8800b9c00000 s81664 r8192 d20736 u524288 +pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152 +pcpu-alloc: [0] 0 1 2 3 +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1005781 +Kernel command line: root=/dev/disk/by-uuid/4295888a-15ee-4216-b358-e6b019fe9ae5 ro +PID hash table entries: 4096 (order: 3, 32768 bytes) +Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) +Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) +xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 +Checking aperture... +No AGP bridge found +Calgary: detecting Calgary via BIOS EBDA area +Calgary: Unable to locate Rio Grande table in EBDA - bailing! +------------[ cut here ]------------ +WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x8a/0xa0() +Hardware name: Aspire 1810TZ +Your BIOS is broken; DMAR reported at address 0! +BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314 +Modules linked in: +Pid: 0, comm: swapper Not tainted 2.6.37-ARCH #1 +Call Trace: + [] warn_slowpath_common+0x7a/0xb0 + [] ? __early_set_fixmap+0x96/0x9d + [] ? _etext+0x0/0x20a532 + [] warn_slowpath_fmt_taint+0x3a/0x40 + [] ? early_ioremap+0x13/0x15 + [] warn_invalid_dmar+0x8a/0xa0 + [] ? acpi_tb_verify_checksum+0x11/0x49 + [] check_zero_address+0x5d/0x116 + [] ? acpi_get_table_with_size+0x53/0xb4 + [] ? _etext+0x0/0x20a532 + [] detect_intel_iommu+0x17/0x84 + [] pci_iommu_alloc+0x8d/0xb8 + [] mem_init+0x19/0xec + [] start_kernel+0x1fc/0x3f5 + [] x86_64_start_reservations+0x132/0x136 + [] x86_64_start_kernel+0x106/0x115 +---[ end trace a7919e7f17c0a725 ]--- +Disabling lock debugging due to kernel taint +Memory: 3954864k/5242880k available (3750k kernel code, 1148052k absent, 139964k reserved, 2002k data, 512k init) +SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +Preemptable hierarchical RCU implementation. + RCU-based detection of stalled CPUs is disabled. + Verbose stalled-CPUs detection is disabled. +NR_IRQS:2304 +Console: colour VGA+ 80x25 +console [tty0] enabled +allocated 41943040 bytes of page_cgroup +please try 'cgroup_disable=memory' option if you don't want memory cgroups +hpet clockevent registered +Fast TSC calibration using PIT +Detected 1296.598 MHz processor. +Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.24 BogoMIPS (lpj=4321993) +pid_max: default: 32768 minimum: 301 +Security Framework initialized +AppArmor: AppArmor disabled by boot time parameter +Mount-cache hash table entries: 256 +Initializing cgroup subsys ns +ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. +Initializing cgroup subsys cpuacct +Initializing cgroup subsys memory +Initializing cgroup subsys devices +Initializing cgroup subsys freezer +Initializing cgroup subsys net_cls +Initializing cgroup subsys blkio +CPU: Physical Processor ID: 0 +CPU: Processor Core ID: 0 +mce: CPU supports 6 MCE banks +CPU0: Thermal monitoring enabled (TM2) +using mwait in idle threads. +Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. +... version: 2 +... bit width: 40 +... generic registers: 2 +... value mask: 000000ffffffffff +... max period: 000000007fffffff +... fixed-purpose events: 3 +... event mask: 0000000700000003 +ACPI: Core revision 20101013 +DMAR: Host address width 36 +DMAR: DRHD base: 0x00000000000000 flags: 0x1 +DMAR: parse DMAR table failure. +Setting APIC routing to flat +..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 +CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a +NMI watchdog enabled, takes one hw-pmu counter. +Booting Node 0, Processors #1 +NMI watchdog enabled, takes one hw-pmu counter. +Brought up 2 CPUs +Total of 2 processors activated (5188.81 BogoMIPS). +devtmpfs: initialized +NET: Registered protocol family 16 +ACPI: bus type pci registered +PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) +PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 +PCI: Using configuration type 1 for base access +bio: create slab at 0 +ACPI: EC: Look up EC in DSDT +ACPI: Executed 1 blocks of module-level executable AML code +[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored +ACPI: SSDT 00000000b9e6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) +ACPI: Dynamic OEM Table Load: +ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) +ACPI: SSDT 00000000b9e6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) +ACPI: Dynamic OEM Table Load: +ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) +ACPI: SSDT 00000000b9e6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117) +ACPI: Dynamic OEM Table Load: +ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117) +ACPI: SSDT 00000000b9e6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) +ACPI: Dynamic OEM Table Load: +ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117) +ACPI: Interpreter enabled +ACPI: (supports S0 S3 S4 S5) +ACPI: Using IOAPIC for interrupt routing +ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 +ACPI: No dock devices found. +PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug +ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) +pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] +pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] +pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] +pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] +pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 +DMAR: Forcing write-buffer flush capability +DMAR: Disabling IOMMU for graphics on this chipset +pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 +pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] +pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] +pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7] +pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 +pci 0000:00:02.1: reg 10: [mem 0xd2400000-0xd24fffff 64bit] +pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 +pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf] +pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 +pci 0000:00:1a.7: reg 10: [mem 0xd4504c00-0xd4504fff] +pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold +pci 0000:00:1a.7: PME# disabled +pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 +pci 0000:00:1b.0: reg 10: [mem 0xd4500000-0xd4503fff 64bit] +pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold +pci 0000:00:1b.0: PME# disabled +pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 +pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold +pci 0000:00:1c.0: PME# disabled +pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 +pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold +pci 0000:00:1c.3: PME# disabled +pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 +pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] +pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 +pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] +pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 +pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] +pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 +pci 0000:00:1d.7: reg 10: [mem 0xd4504800-0xd4504bff] +pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold +pci 0000:00:1d.7: PME# disabled +pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 +pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 +pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 +pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf] +pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df] +pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7] +pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db] +pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f] +pci 0000:00:1f.2: reg 24: [mem 0xd4504000-0xd45047ff] +pci 0000:00:1f.2: PME# supported from D3hot +pci 0000:00:1f.2: PME# disabled +pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 +pci 0000:00:1f.3: reg 10: [mem 0xd4505000-0xd45050ff 64bit] +pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] +pci 0000:01:00.0: [1969:1063] type 0 class 0x000200 +pci 0000:01:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit] +pci 0000:01:00.0: reg 18: [io 0x2000-0x207f] +pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold +pci 0000:01:00.0: PME# disabled +pci 0000:00:1c.0: PCI bridge to [bus 01-01] +pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] +pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd44fffff] +pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] +pci 0000:02:00.0: [8086:0083] type 0 class 0x000280 +pci 0000:02:00.0: reg 10: [mem 0xd2500000-0xd2501fff 64bit] +pci 0000:02:00.0: PME# supported from D0 D3hot D3cold +pci 0000:02:00.0: PME# disabled +pci 0000:00:1c.3: PCI bridge to [bus 02-02] +pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] +pci 0000:00:1c.3: bridge window [mem 0xd2500000-0xd34fffff] +pci 0000:00:1c.3: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] +pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) +pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) +pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) +pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) +pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) +pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) +pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) +pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) +pci_bus 0000:00: on NUMA node 0 +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] +ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) +ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) +ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) +ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) +ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. +ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. +ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) +ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) +HEST: Table is not found! +vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none +vgaarb: loaded +PCI: Using ACPI for IRQ routing +PCI: pci_cache_line_size set to 64 bytes +reserve RAM buffer: 000000000009e000 - 000000000009ffff +reserve RAM buffer: 00000000b9e60000 - 00000000bbffffff +reserve RAM buffer: 00000000b9f80000 - 00000000bbffffff +reserve RAM buffer: 00000000b9fe2000 - 00000000bbffffff +reserve RAM buffer: 00000000ba000000 - 00000000bbffffff +NetLabel: Initializing +NetLabel: domain hash size = 128 +NetLabel: protocols = UNLABELED CIPSOv4 +NetLabel: unlabeled traffic allowed by default +HPET: 4 timers in total, 0 timers will be used for per-cpu timer +hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 +hpet0: 4 comparators, 64-bit 14.318180 MHz counter +Switching to clocksource tsc +pnp: PnP ACPI init +ACPI: bus type pnp registered +pnp 00:00: [bus 00-ff] +pnp 00:00: [io 0x0000-0x0cf7 window] +pnp 00:00: [io 0x0cf8-0x0cff] +pnp 00:00: [io 0x0d00-0xffff window] +pnp 00:00: [mem 0x000a0000-0x000bffff window] +pnp 00:00: [mem 0x000c0000-0x000c3fff window] +pnp 00:00: [mem 0x000c4000-0x000c7fff window] +pnp 00:00: [mem 0x000c8000-0x000cbfff window] +pnp 00:00: [mem 0x000cc000-0x000cffff window] +pnp 00:00: [mem 0x000d0000-0x000d3fff window] +pnp 00:00: [mem 0x000d4000-0x000d7fff window] +pnp 00:00: [mem 0x000d8000-0x000dbfff window] +pnp 00:00: [mem 0x000dc000-0x000dffff window] +pnp 00:00: [mem 0x000e0000-0x000e3fff window] +pnp 00:00: [mem 0x000e4000-0x000e7fff window] +pnp 00:00: [mem 0x000e8000-0x000ebfff window] +pnp 00:00: [mem 0x000ec000-0x000effff window] +pnp 00:00: [mem 0x000f0000-0x000fffff window] +pnp 00:00: [mem 0xc0000000-0xfebfffff window] +pnp 00:00: [mem 0xfed40000-0xfed44fff window] +pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) +pnp 00:01: [io 0x002e-0x002f] +pnp 00:01: [io 0x004e-0x004f] +pnp 00:01: [io 0x164e-0x164f] +pnp 00:01: [io 0x0061] +pnp 00:01: [io 0x0070] +pnp 00:01: [io 0x0080] +pnp 00:01: [io 0x0092] +pnp 00:01: [io 0x00b2-0x00b3] +pnp 00:01: [io 0x0063] +pnp 00:01: [io 0x0065] +pnp 00:01: [io 0x0067] +pnp 00:01: [io 0x0600-0x060f] +pnp 00:01: [io 0x0610] +pnp 00:01: [io 0x0800-0x080f] +pnp 00:01: [io 0x0810-0x0817] +pnp 00:01: [io 0x0820-0x0823] +pnp 00:01: [io 0x0400-0x047f] +pnp 00:01: [io 0x0500-0x053f] +pnp 00:01: [mem 0xf8000000-0xfbffffff] +pnp 00:01: [mem 0xfed1c000-0xfed1ffff] +pnp 00:01: [mem 0xfed10000-0xfed13fff] +pnp 00:01: [mem 0xfed18000-0xfed18fff] +pnp 00:01: [mem 0xfed19000-0xfed19fff] +pnp 00:01: [mem 0xfec00000-0xfec00fff] +pnp 00:01: [mem 0xfed20000-0xfed3ffff] +pnp 00:01: [mem 0xfed40000-0xfed44fff] +pnp 00:01: [mem 0xfed45000-0xfed8ffff] +pnp 00:01: [mem 0xfee00000-0xfee00fff] +pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff] +pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) +pnp 00:02: [io 0x0000-0x001f] +pnp 00:02: [io 0x0081-0x0091] +pnp 00:02: [io 0x0093-0x009f] +pnp 00:02: [io 0x00c0-0x00df] +pnp 00:02: [dma 4] +pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) +pnp 00:03: [io 0x0070-0x0077] +pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) +pnp 00:04: [irq 0 disabled] +pnp 00:04: [irq 8] +pnp 00:04: [mem 0xfed00000-0xfed003ff] +pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) +pnp 00:05: [io 0x00f0] +pnp 00:05: [irq 13] +pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) +pnp 00:06: [mem 0xff800000-0xffffffff] +pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) +pnp 00:07: [io 0x0060] +pnp 00:07: [io 0x0064] +pnp 00:07: [irq 1] +pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) +pnp 00:08: [irq 12] +pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active) +pnp: PnP ACPI: found 9 devices +ACPI: ACPI bus type pnp unregistered +system 00:01: [io 0x0600-0x060f] has been reserved +system 00:01: [io 0x0610] has been reserved +system 00:01: [io 0x0800-0x080f] has been reserved +system 00:01: [io 0x0810-0x0817] has been reserved +system 00:01: [io 0x0820-0x0823] has been reserved +system 00:01: [io 0x0400-0x047f] has been reserved +system 00:01: [io 0x0500-0x053f] has been reserved +system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved +system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved +system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved +system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved +system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved +system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved +system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved +system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved +system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved +system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved +pci 0000:00:1c.0: PCI bridge to [bus 01-01] +pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] +pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd44fffff] +pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] +pci 0000:00:1c.3: PCI bridge to [bus 02-02] +pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] +pci 0000:00:1c.3: bridge window [mem 0xd2500000-0xd34fffff] +pci 0000:00:1c.3: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] +pci 0000:00:1e.0: PCI bridge to [bus 03-03] +pci 0000:00:1e.0: bridge window [io disabled] +pci 0000:00:1e.0: bridge window [mem disabled] +pci 0000:00:1e.0: bridge window [mem pref disabled] +pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 +pci 0000:00:1c.0: setting latency timer to 64 +pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 +pci 0000:00:1c.3: setting latency timer to 64 +pci 0000:00:1e.0: setting latency timer to 64 +pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] +pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] +pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] +pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff] +pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] +pci_bus 0000:01: resource 1 [mem 0xd3500000-0xd44fffff] +pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref] +pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] +pci_bus 0000:02: resource 1 [mem 0xd2500000-0xd34fffff] +pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref] +pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] +pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] +pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] +pci_bus 0000:03: resource 7 [mem 0xc0000000-0xfebfffff] +NET: Registered protocol family 2 +IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) +TCP established hash table entries: 262144 (order: 10, 4194304 bytes) +TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) +TCP: Hash tables configured (established 262144 bind 65536) +TCP reno registered +UDP hash table entries: 2048 (order: 4, 65536 bytes) +UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) +NET: Registered protocol family 1 +pci 0000:00:02.0: Boot video device +PCI: CLS 64 bytes, default 64 +Unpacking initramfs... +Freeing initrd memory: 1708k freed +PCI-DMA: Using software bounce buffering for IO (SWIOTLB) +Placing 64MB software IO TLB between ffff8800b545d000 - ffff8800b945d000 +software IO TLB at phys 0xb545d000 - 0xb945d000 +Simple Boot Flag value 0x5 read from CMOS RAM was invalid +Simple Boot Flag at 0x44 set to 0x1 +Scanning for low memory corruption every 60 seconds +audit: initializing netlink socket (disabled) +type=2000 audit(1298219411.466:1): initialized +HugeTLB registered 2 MB page size, pre-allocated 0 pages +VFS: Disk quotas dquot_6.5.2 +Dquot-cache hash table entries: 512 (order 0, 4096 bytes) +msgmni has been set to 7727 +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) +io scheduler noop registered +io scheduler deadline registered +io scheduler cfq registered (default) +intel_idle: MWAIT substates: 0x22220 +intel_idle: does not run on family 6 model 23 +ERST: Table is not found! +Linux agpgart interface v0.103 +Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled +PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 +i8042.c: Detected active multiplexing controller, rev 1.1. +serio: i8042 KBD port at 0x60,0x64 irq 1 +serio: i8042 AUX0 port at 0x60,0x64 irq 12 +serio: i8042 AUX1 port at 0x60,0x64 irq 12 +serio: i8042 AUX2 port at 0x60,0x64 irq 12 +serio: i8042 AUX3 port at 0x60,0x64 irq 12 +mice: PS/2 mouse device common for all mice +rtc_cmos 00:03: RTC can wake from S4 +rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 +rtc0: alarms up to one month, 242 bytes nvram, hpet irqs +cpuidle: using governor ladder +cpuidle: using governor menu +TCP cubic registered +NET: Registered protocol family 17 +Registering the dns_resolver key type +PM: Hibernation image not present or could not be loaded. +registered taskstats version 1 +rtc_cmos 00:03: setting system clock to 2011-02-20 16:30:11 UTC (1298219411) +Initalizing network drop monitor service +Freeing unused kernel memory: 512k freed +input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 +udev[37]: starting version 165 +SCSI subsystem initialized +libata version 3.00 loaded. +ahci 0000:00:1f.2: version 3.0 +ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 +ahci 0000:00:1f.2: irq 40 for MSI/MSI-X +ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode +ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs +ahci 0000:00:1f.2: setting latency timer to 64 +scsi0 : ahci +scsi1 : ahci +scsi2 : ahci +scsi3 : ahci +ata1: SATA max UDMA/133 abar m2048@0xd4504000 port 0xd4504100 irq 40 +ata2: DUMMY +ata3: DUMMY +ata4: DUMMY +ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) +ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 +ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA +ata1.00: configured for UDMA/133 +scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 +sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) +sd 0:0:0:0: [sda] Write Protect is off +sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 +sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA + sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > +sd 0:0:0:0: [sda] Attached SCSI disk +EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) +udev[484]: starting version 166 +ACPI: acpi_idle registered with cpuidle +Monitor-Mwait will be used to enter C-1 state +Monitor-Mwait will be used to enter C-2 state +Marking TSC unstable due to TSC halts in idle +Switching to clocksource hpet +sd 0:0:0:0: Attached scsi generic sg0 type 0 +pci_hotplug: PCI Hot Plug PCI Core version: 0.5 +shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 +iTCO_vendor_support: vendor-support=0 +iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 +iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460) +iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) +ACPI: AC Adapter [ACAD] (on-line) +ACPI: Battery Slot [BAT1] (battery present) +input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 +ACPI: Power Button [PWRB] +input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 +ACPI: Lid Switch [LID0] +input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 +ACPI: Sleep Button [SLPB] +input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 +ACPI: Power Button [PWRF] +usbcore: registered new interface driver usbfs +usbcore: registered new interface driver hub +usbcore: registered new device driver usb +i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 +wmi: Mapper loaded +cfg80211: Calling CRDA to update world regulatory domain +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 +ehci_hcd 0000:00:1a.7: setting latency timer to 64 +ehci_hcd 0000:00:1a.7: EHCI Host Controller +ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 +ehci_hcd 0000:00:1a.7: debug port 1 +ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported +ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd4504c00 +ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 2 ports detected +ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 +ehci_hcd 0000:00:1d.7: setting latency timer to 64 +ehci_hcd 0000:00:1d.7: EHCI Host Controller +ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 +ehci_hcd 0000:00:1d.7: debug port 1 +ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported +ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4504800 +ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 +hub 2-0:1.0: USB hub found +hub 2-0:1.0: 6 ports detected +agpgart-intel 0000:00:00.0: Intel GM45 Chipset +agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable +agpgart-intel 0000:00:00.0: detected 65536K stolen memory, trimming to 32768K +agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 +uhci_hcd: USB Universal Host Controller Interface driver +uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +uhci_hcd 0000:00:1a.0: setting latency timer to 64 +uhci_hcd 0000:00:1a.0: UHCI Host Controller +uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 +uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0 +hub 3-0:1.0: USB hub found +hub 3-0:1.0: 2 ports detected +uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 +uhci_hcd 0000:00:1d.0: setting latency timer to 64 +uhci_hcd 0000:00:1d.0: UHCI Host Controller +uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 +uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 +hub 4-0:1.0: USB hub found +hub 4-0:1.0: 2 ports detected +uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 +uhci_hcd 0000:00:1d.1: setting latency timer to 64 +uhci_hcd 0000:00:1d.1: UHCI Host Controller +uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 +uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 +hub 5-0:1.0: USB hub found +hub 5-0:1.0: 2 ports detected +uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 +uhci_hcd 0000:00:1d.2: setting latency timer to 64 +uhci_hcd 0000:00:1d.2: UHCI Host Controller +uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 +uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040 +hub 6-0:1.0: USB hub found +hub 6-0:1.0: 2 ports detected +input: PC Speaker as /devices/platform/pcspkr/input/input5 +[drm] Initialized drm 1.1.0 20060810 +usb 2-5: new high speed USB device using ehci_hcd and address 2 +atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +atl1c 0000:01:00.0: setting latency timer to 64 +i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +i915 0000:00:02.0: setting latency timer to 64 +atl1c 0000:01:00.0: version 1.0.1.0-NAPI +iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: +iwlagn: Copyright(c) 2003-2010 Intel Corporation +iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 +iwlagn 0000:02:00.0: setting latency timer to 64 +iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C +i915 0000:00:02.0: irq 41 for MSI/MSI-X +iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6 +iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels +iwlagn 0000:02:00.0: irq 42 for MSI/MSI-X +Linux video capture interface: v2.00 +uvcvideo: Found UVC 1.00 device WebCam (064e:a102) +input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6 +usbcore: registered new interface driver uvcvideo +USB Video Class driver (v1.0.0) +vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem +iwlagn 0000:02:00.0: loaded firmware version 128.50.3.1 build 13488 +ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' +Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000 +input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 +Console: switching to colour frame buffer device 170x48 +fb0: inteldrmfb frame buffer device +drm: registered panic notifier +acpi device:03: registered as cooling_device2 +input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 +ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) +[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 +HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 +HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X +HDA Intel 0000:00:1b.0: setting latency timer to 64 +hda_codec: ALC269: BIOS auto-probing. +input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 +input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 +input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 +EXT4-fs (sda7): re-mounted. Opts: (null) +EXT4-fs (sda7): re-mounted. Opts: (null) +EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) +EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) +REISERFS (device sda6): found reiserfs format "3.6" with standard journal +REISERFS (device sda6): using ordered data mode +REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 +REISERFS (device sda6): checking transaction log (sda6) +REISERFS (device sda6): Using r5 hash to sort names +Adding 4000148k swap on /dev/sda5. Priority:-1 extents:1 across:4000148k +NET: Registered protocol family 10 +lo: Disabled Privacy Extensions +ADDRCONF(NETDEV_UP): wlan0: link is not ready +atl1c 0000:01:00.0: irq 44 for MSI/MSI-X +ADDRCONF(NETDEV_UP): eth0: link is not ready +ADDRCONF(NETDEV_UP): wlan0: link is not ready +atl1c 0000:01:00.0: irq 44 for MSI/MSI-X +ADDRCONF(NETDEV_UP): eth0: link is not ready +ADDRCONF(NETDEV_UP): wlan0: link is not ready +wlan0: authenticate with bc:05:43:49:74:4e (try 1) +wlan0: authenticated +wlan0: associate with bc:05:43:49:74:4e (try 1) +wlan0: RX AssocResp from bc:05:43:49:74:4e (capab=0x431 status=0 aid=3) +wlan0: associated +ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready +Intel AES-NI instructions are not detected. +padlock: VIA PadLock not detected. +wlan0: no IPv6 routers present +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 1 +iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = bc:05:43:49:74:4e tid = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 6 because load = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 6 because load = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 6 because load = 0 +iwlagn 0000:02:00.0: low ack count detected, restart firmware +iwlagn 0000:02:00.0: On demand firmware reload +iwlagn 0000:02:00.0: Stopping AGG while state not ON or starting +iwlagn 0000:02:00.0: queue number out of range: 0, must be 10 to 19 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 1 +iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = bc:05:43:49:74:4e tid = 0 +iwlagn 0000:02:00.0: low ack count detected, restart firmware +iwlagn 0000:02:00.0: On demand firmware reload +iwlagn 0000:02:00.0: Stopping AGG while state not ON or starting +iwlagn 0000:02:00.0: queue number out of range: 0, must be 10 to 19 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 7 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 0 because load = 2 +iwlagn 0000:02:00.0: iwlagn_tx_agg_start on ra = bc:05:43:49:74:4e tid = 0 +iwlagn 0000:02:00.0: Aggregation not enabled for tid 6 because load = 1 +iwlagn 0000:02:00.0: Microcode SW error detected. Restarting 0x82000000. +iwlagn 0000:02:00.0: Loaded firmware version: 128.50.3.1 build 13488 +iwlagn 0000:02:00.0: Start IWL Error Log Dump: +iwlagn 0000:02:00.0: Status: 0x000212E4, count: 5 +iwlagn 0000:02:00.0: Desc Time data1 data2 line +iwlagn 0000:02:00.0: SYSASSERT (0x0005) 0641280857 0x01808035 0x00004900 1363 +iwlagn 0000:02:00.0: pc blink1 blink2 ilink1 ilink2 hcmd +iwlagn 0000:02:00.0: 0x035D0 0x034A0 0x034A0 0x00892 0x00000 0x4B2004E +iwlagn 0000:02:00.0: CSR values: +iwlagn 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) +iwlagn 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00c80300 +iwlagn 0000:02:00.0: CSR_INT_COALESCING: 0X0000ff40 +iwlagn 0000:02:00.0: CSR_INT: 0X00000000 +iwlagn 0000:02:00.0: CSR_INT_MASK: 0Xba00008b +iwlagn 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000 +iwlagn 0000:02:00.0: CSR_GPIO_IN: 0X00000000 +iwlagn 0000:02:00.0: CSR_RESET: 0X00000000 +iwlagn 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5 +iwlagn 0000:02:00.0: CSR_HW_REV: 0X0000006c +iwlagn 0000:02:00.0: CSR_EEPROM_REG: 0X007808e5 +iwlagn 0000:02:00.0: CSR_EEPROM_GP: 0X90000001 +iwlagn 0000:02:00.0: CSR_OTP_GP_REG: 0X00010001 +iwlagn 0000:02:00.0: CSR_GIO_REG: 0X00080046 +iwlagn 0000:02:00.0: CSR_GP_UCODE_REG: 0X0000a0bf +iwlagn 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000 +iwlagn 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000 +iwlagn 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000 +iwlagn 0000:02:00.0: CSR_LED_REG: 0X00000058 +iwlagn 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X8813b16a +iwlagn 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 +iwlagn 0000:02:00.0: CSR_ANA_PLL_CFG: 0X00880300 +iwlagn 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a +iwlagn 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0000 +iwlagn 0000:02:00.0: FH register values: +iwlagn 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X13a53700 +iwlagn 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X0138df60 +iwlagn 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000038 +iwlagn 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 +iwlagn 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc +iwlagn 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 +iwlagn 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 +iwlagn 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 +iwlagn 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 +iwlagn 0000:02:00.0: Start IWL Event Log Dump: nothing in log +iwlagn 0000:02:00.0: Stopping AGG while state not ON or starting +iwlagn 0000:02:00.0: queue number out of range: 0, must be 10 to 19 +usb 4-2: new full speed USB device using uhci_hcd and address 2 +input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input12 +generic-usb 0003:046D:C066.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:1d.0-2/input0 +input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.1/input/input13 +generic-usb 0003:046D:C066.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:1d.0-2/input1 +usbcore: registered new interface driver usbhid +usbhid: USB HID core driver